 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB
Ultimate protection for hard-driven, high performance vehicles. Dramatically
reduces friction and wear for improved performance. Excels at both high- and
low-temperature performance. Outperforms other conventional and synthetic
greases.
Ultimate protection for hard-driven, high performance vehicles. Dramatically
reduces friction and wear for improved performance. Excels at both high- and
low-temperature performance. Outperforms other conventional and synthetic
greases.
Synthetic GH Series Heavy-Duty EP Grease
NLGI #1, GC/LB
Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel
drive steering knuckles, spring shackles, heavy equipment pivot joints and other
components operating in high-load, low-speed conditions. NLGI #1 is preferred
for cold temperatures and auto pumping systems. Offers excellent water washout
resistance.
NLGI #1, GC/LB
Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel
drive steering knuckles, spring shackles, heavy equipment pivot joints and other
components operating in high-load, low-speed conditions. NLGI #1 is preferred
for cold temperatures and auto pumping systems. Offers excellent water washout
resistance.
Synthetic Multi-Purpose Grease, NLGI #2
Reduces friction and wear in high-speed, high-temperature components such as
automotive wheel bearings and electric motors. Keeps components running
clean and trouble free for outstanding performance and long-life. NLGI #0 and
NLGI #1 greases have better mobility and are preferred for cold temperature and
automatic pump systems. NLGI #2 is the primary wheel bearing recommendation.
Reduces friction and wear in high-speed, high-temperature components such as
automotive wheel bearings and electric motors. Keeps components running
clean and trouble free for outstanding performance and long-life. NLGI #0 and
NLGI #1 greases have better mobility and are preferred for cold temperature and
automatic pump systems. NLGI #2 is the primary wheel bearing recommendation.
AMSOIL Semi-Fluid 00 Synthetic EP Grease is a
lithium complex semifluid grease (NLGI 00)
formulated with high-viscosity ISO-460 synthetic base
oils. Coupled with a sophisticated additive package,
AMSOIL Semi-Fluid 00 Synthetic EP Grease coats and
reacts to metal surfaces, providing an unparalleled
protection system that reduces wear and prevents
damage. Advanced extreme-pressure additives
provide superior protection and performance in
shock-loading applications which can rupture the oil
film of conventional greases and lead to damaging
metal-to-metal contact. AMSOIL Semi-Fluid 00
Synthetic EP Grease resists water and provides
superior protection against corrosion and oxidation,
which can eat away and destroy critical components
and lead to equipment failure.
lithium complex semifluid grease (NLGI 00)
formulated with high-viscosity ISO-460 synthetic base
oils. Coupled with a sophisticated additive package,
AMSOIL Semi-Fluid 00 Synthetic EP Grease coats and
reacts to metal surfaces, providing an unparalleled
protection system that reduces wear and prevents
damage. Advanced extreme-pressure additives
provide superior protection and performance in
shock-loading applications which can rupture the oil
film of conventional greases and lead to damaging
metal-to-metal contact. AMSOIL Semi-Fluid 00
Synthetic EP Grease resists water and provides
superior protection against corrosion and oxidation,
which can eat away and destroy critical components
and lead to equipment failure.
Grease
Synthetic Multi-Purpose Spray Grease, NLGI #2
The same great AMSOIL Synthetic Multi-Purpose Grease in a convenient spray
formulation. Ideal for greasing hard-to-reach equipment such as hinges, springs
and other common applications.
Package sizes include:
10.5-oz. Spray Can
10.5-oz. Spray Cans (case of 12)
PRODUCT DESCRIPTION
AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease
standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple
use applications. This grease is composed of synthetic base oils and lithium
complex thickeners that provide the film strength, shear resistance and mechanical
stability required for good grease lubrication. This combination excels in high and
low operating temperature ranges by providing excellent oxidation stability, high
temperature dropping points, good low temperature torque values and good low
temperature pumping capabilities. GLC Grease is compounded with an effective oil
soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion
inhibitors that impart good oxidation stability and rust protection.
AMSOIL’s top performing lithium complex thickener system provides excellent
adhesion properties and water resistance as identified by ASTM D-1264 water
washout test. This resistance to water means a protective film of lubricant remains
present to protect equipment against wear while the corrosion inhibitors prevent
rust. AMSOIL GLC Grease adheres to metal in all types of environments and resists
squeeze out during operation. These qualities ensure maximum lubricant
protection during harsh operations.
AMSOIL GLC multi-purpose greases is recommended for many different
applications. Its diversity simplifies lubricant inventories and prevents greasing
errors while providing problem-free operation. AMSOIL GLC Grease reduces repair
and maintenance costs.
PERFORMANCE FEATURES
* High dropping point of 550°F
* Resists thermal and oxidation degradation (lasts longer than conventional grease)
* Excellent water-washout resistance
* Good low temperature pumpability and torque values
* Adhesive and shear stable to prevent squeeze out
APPLICATION RECOMMENDATION
NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures,
sleeve type bushings, high shock loading environments, wet environments. and is
the primary choice for wheel bearings.
The correct consistency grade of AMSOIL GL multi-purpose greases are
recommended for use in heavy and light duty applications found in manufacturing
plants, automotive applications, agricultural equipment and construction
equipment. These include, but are not limited to, roller bearings, plain bearings,
thrust bearings, gears, electric motors, presses, winches, bushings, wheel
bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering
knuckles. AMSOIL GL greases are suitable for use up to 350° F. When operating at
elevated temperatures, frequent regreasing may be required.
AMSOIL GL Lithium Complex Greases are compatible with many other types of
greases. However, it is recommended that when changing greases, the equipment
be cleaned of the old grease when possible or flushed with a liberal amount of the
GL grease while the mechanism is in operation. Closely monitor the system for any
inconsistencies. Grease compatibility questions should be referred to your AMSOIL
representative or AMSOIL Inc.
APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is
performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant
ingestion. Maintain bearing housings one-third to one-half full of grease. Do not
over-grease, as excessive heat buildup can result. Supplement standard grease
maintenance by periodically cleaning and packing housings with fresh grease on
an established maintenance schedule.
Typical Technical Properties
Synthetic GL Series Spray Grease GLC
Thickener lithium complex
Fortified with moly compound no
NLGI Consistency Grade 2
NLGI Pertormance Grade GC-LB
Penetration ASIM D-217 (25ºC (77ºF), 0.1 mm) Worked 60 strokes 265-295
Dropping Point, ºF ASTM D-2265 550
High Temperature Life ASTM D-3527 160 hrs.
Oxidation Stability - ASTM D-942 1.8 psi
Water Washout-ASTM D-1264 1.6%
Rust & Corrosion- ASTM D-1743 pass
Oil Separation-ASTM D1742 24 hrs., 25ºC (77ºF), % loss 1.1
Bearing Leak Test ASTM D-1 263 6 hrs., 600 rpm, 104ºC (220ºF), g lost <1
Leakage (ASTM D-4290), g 1.0
Four Ball Wear Test ASTM D-2266 0.40
Fretting Wear (ASTM D-4170) Mg 3.4
Four Ball EP ASTM D-2596 Weld Point, kgt 400
Four Ball EP ASTM D-2596 Load Wear Index, kgf 50
Timken OK Load Test -ASTM D-2509, lbs 50
Low Temperature Torque - ASTM D-4693 N-m, -40ºC (-40ºF) 1.3
LT-37 Pumpability, 60ºF 360 g/min.
Copper Corrosion - ASTM D-4048 1B
Meets Disc Brake Wheel Bearing Specification: Ford ESA-MiC 198-A Yes
Meets Disc Brake Wheel Bearing Specification: GM6031-M Yes
Meets Disc Brake Wheel Bearing Specification: Chrysler MS-3701 Yes
Oil Viscosity 40ºC 151 cSt
Oil Viscosity 100ºCV 19.2 cSt
Flash Point - ASTM D-92 450
Fire Point - ASTM D-97 485
Color Red
Texture Smooth
The same great AMSOIL Synthetic Multi-Purpose Grease in a convenient spray
formulation. Ideal for greasing hard-to-reach equipment such as hinges, springs
and other common applications.
Package sizes include:
10.5-oz. Spray Can
10.5-oz. Spray Cans (case of 12)
PRODUCT DESCRIPTION
AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease
standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple
use applications. This grease is composed of synthetic base oils and lithium
complex thickeners that provide the film strength, shear resistance and mechanical
stability required for good grease lubrication. This combination excels in high and
low operating temperature ranges by providing excellent oxidation stability, high
temperature dropping points, good low temperature torque values and good low
temperature pumping capabilities. GLC Grease is compounded with an effective oil
soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion
inhibitors that impart good oxidation stability and rust protection.
AMSOIL’s top performing lithium complex thickener system provides excellent
adhesion properties and water resistance as identified by ASTM D-1264 water
washout test. This resistance to water means a protective film of lubricant remains
present to protect equipment against wear while the corrosion inhibitors prevent
rust. AMSOIL GLC Grease adheres to metal in all types of environments and resists
squeeze out during operation. These qualities ensure maximum lubricant
protection during harsh operations.
AMSOIL GLC multi-purpose greases is recommended for many different
applications. Its diversity simplifies lubricant inventories and prevents greasing
errors while providing problem-free operation. AMSOIL GLC Grease reduces repair
and maintenance costs.
PERFORMANCE FEATURES
* High dropping point of 550°F
* Resists thermal and oxidation degradation (lasts longer than conventional grease)
* Excellent water-washout resistance
* Good low temperature pumpability and torque values
* Adhesive and shear stable to prevent squeeze out
APPLICATION RECOMMENDATION
NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures,
sleeve type bushings, high shock loading environments, wet environments. and is
the primary choice for wheel bearings.
The correct consistency grade of AMSOIL GL multi-purpose greases are
recommended for use in heavy and light duty applications found in manufacturing
plants, automotive applications, agricultural equipment and construction
equipment. These include, but are not limited to, roller bearings, plain bearings,
thrust bearings, gears, electric motors, presses, winches, bushings, wheel
bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering
knuckles. AMSOIL GL greases are suitable for use up to 350° F. When operating at
elevated temperatures, frequent regreasing may be required.
AMSOIL GL Lithium Complex Greases are compatible with many other types of
greases. However, it is recommended that when changing greases, the equipment
be cleaned of the old grease when possible or flushed with a liberal amount of the
GL grease while the mechanism is in operation. Closely monitor the system for any
inconsistencies. Grease compatibility questions should be referred to your AMSOIL
representative or AMSOIL Inc.
APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is
performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant
ingestion. Maintain bearing housings one-third to one-half full of grease. Do not
over-grease, as excessive heat buildup can result. Supplement standard grease
maintenance by periodically cleaning and packing housings with fresh grease on
an established maintenance schedule.
Typical Technical Properties
Synthetic GL Series Spray Grease GLC
Thickener lithium complex
Fortified with moly compound no
NLGI Consistency Grade 2
NLGI Pertormance Grade GC-LB
Penetration ASIM D-217 (25ºC (77ºF), 0.1 mm) Worked 60 strokes 265-295
Dropping Point, ºF ASTM D-2265 550
High Temperature Life ASTM D-3527 160 hrs.
Oxidation Stability - ASTM D-942 1.8 psi
Water Washout-ASTM D-1264 1.6%
Rust & Corrosion- ASTM D-1743 pass
Oil Separation-ASTM D1742 24 hrs., 25ºC (77ºF), % loss 1.1
Bearing Leak Test ASTM D-1 263 6 hrs., 600 rpm, 104ºC (220ºF), g lost <1
Leakage (ASTM D-4290), g 1.0
Four Ball Wear Test ASTM D-2266 0.40
Fretting Wear (ASTM D-4170) Mg 3.4
Four Ball EP ASTM D-2596 Weld Point, kgt 400
Four Ball EP ASTM D-2596 Load Wear Index, kgf 50
Timken OK Load Test -ASTM D-2509, lbs 50
Low Temperature Torque - ASTM D-4693 N-m, -40ºC (-40ºF) 1.3
LT-37 Pumpability, 60ºF 360 g/min.
Copper Corrosion - ASTM D-4048 1B
Meets Disc Brake Wheel Bearing Specification: Ford ESA-MiC 198-A Yes
Meets Disc Brake Wheel Bearing Specification: GM6031-M Yes
Meets Disc Brake Wheel Bearing Specification: Chrysler MS-3701 Yes
Oil Viscosity 40ºC 151 cSt
Oil Viscosity 100ºCV 19.2 cSt
Flash Point - ASTM D-92 450
Fire Point - ASTM D-97 485
Color Red
Texture Smooth